Thank you for choosing Ultra Air Cooler!
The #1 Best Selling Portable Space Air Cooler!
If you have any questions or concerns, please feel free to reach out to our customer service team for additional help.
STEP BY STEP SETUP GUIDE
Step 1. Place Ultra Air Cooler on a flat surface such as a nightstand, desk or table. Attach the Power Cord to Power Adapter Port and plug the Power Adapter into the wall outlet.
Step 2. Pull out the Filter storage port & remove the filter
Step 3. For best results in experiencing the coolest air, soak the filter under cold running later and then place the wet filter in the freezer until it's frozen.
Step 4. Open Water Storage Tank Door & fill up with cold water up until the line. You can even add a couple ice cubes to make it cooler!
Close the tank door before use!
HOW TO USE GUIDE
Now that you're all done setting up your Ultra Air Cooler, it's now time to use it!
Step 1. Press the power button to turn on the Ultra Air Cooler. The default fan speed is set to high.
- Press 1 time: Power on - High speed
- Press 2 times: Medium speed
- Press 3 times: Low speed
- Press 4 times: Turn off
PLEASE NOTE: Ultra Air Cooler will run anywhere from 6-8 hours on high, 8-10 hours on medium & 10-12 hours on low.
Step 2: Use the direction tab to adjust where you wish the flow of air to your personal preference.
Step 3. Choose LED night light setting by pressing the light power button.
Step 4. To completely shut down the Ultra Air Cooler, press the fan power button until fan turns off, if you are on low speed it's only 1 press after that speed to turn off & the power mode light indicator will turn off.
NOTE: If you don't plan on using the Ultra Air Cooler for an extended period of time, it's highly recommended that fully empty and let filter and unit air dry before storing away. This will avoid mold and unpleasant smells to prolong the life of the unit and the filter.
We highly recommend cleaning your Ultra Air Cooler weekly to keep it in the best working condition and replacing the filter every 3-6 months (depending on the frequency use)
- To prepare for cleaning, empty out all the water from the water tank. By doing this hold ultra Air Cooler upside down over a sink and carefully dump out to avoid splashing or spilling.
- Remove the filter from storage tray & use warm water and soap to wipe filter tray and grill then rinse off until clean.
- If you notice the water tank is dirty use a brush (toothbrush, bottle brush, etc.) and clean the inside of tank, use warm water to help clean off quicker.
IMPORTANT: If you start to see mold on the filter or notice a musty smell, stop and clean the filter before any further use. Full soak the filter in a bowl filled with clean water and vinegar. Allow it to soak for 60 minutes. Rinse the water and let it air dry.
Please note: You may notice some condensation forming on the front. This is totally normal and happens with your typical air conditioner as well.
Contact our customer service team for any additional help.